SCADA Alarms

Tubing pressure dropped 22 psi in 4 hours — possible parted rod or gas lock. Investigate flowline.

ESP motor temperature 285F — 15F above normal, trending up over 48 hours. Check VSD frequency.

Well shut-in due to high water cut (55%). Evaluate rod pump conversion or workover candidacy.

Production rate 8% below 7-day average. Rod pump may need stroke adjustment.

Tank #2 at 78% capacity — schedule hauler dispatch by Thursday to avoid overflow.

Water tank at 82% — hauler dispatch needed today. Production tanks within limits.

Well offline for planned ESP-to-rod-pump workover. Target completion Friday.

CO2 content 4.2% — corrosion inhibitor injection rate verified at target 1.8 gal/hr.

Well shut-in due to high water cut (58%). Candidate for P&A or sidetrack evaluation.

Scale inhibitor tank below 20% — refill scheduled on Jake's route today.

Flowing wellhead pressure 2,840 psi — new completion, monitoring flowback. Normal for IP phase.

Tubing pressure 2 psi below baseline — within variance. Monitor on next gauge round.

ESP running at 52 Hz — optimal for current inflow performance. No action required.

Casing pressure dropped 3 psi overnight. Within normal variance for rod-pump wells.

SCADA telemetry lost for 12 minutes at midnight — reconnected automatically. Possible cell signal.